Exotic Edged Weapons and Miniature Firearms

The blade measures 13-1/2 inches long and 3-1/4 inches wide.  It measures 18 inches overall out of the scabbard and 18-1/2 inches overall in the scabbard.

These are some detailed views:

• Grip Top
• Grip Bottom
• In the sabbard
• Close-up detail of blade
• Tip of the sword

The condition is near excellent with deep darkness in the iron blade.

.

The blade measures 16 inches long and 8 inches wide at the top curve, edge to point.  It measures 25-1/2 inches overall.

The handle is unusual, with a three lobe wooden pommel area and a wrought iron wrapped handle one quarter of the way up from the bottom.

This appears to date to the late 19th century.  The iron is very dark and shows years of age.

These are some detailed views:

• Grip Left
• Grip Right
• Blade Left
• Blade Right

The condition is near excellent with deep darkness in the iron blade.

.

It is a simple inward curved short sword with carved decorations on the both sides of the blade and an inscription of a verse from the Koran on the left side of the blade.

The blade measures 21-1/4 inches long and 8-1/2 inches of grip and decorative embellishments.  The grip is 4 inches wide at the top edges of the thick wings.  There is a long narrow fuller running the length of the blade next to the spine to within 2 inches of the tip. It measures 27 inches long overall.

This appears to date to the 19th century.  The iron is very dark and shows years of age.

These are some detailed views:

• Grip Left
• Grip Right
• Blade Left
• Blade Right

The condition is near excellent with deep darkness in the iron blade.

.

It is a simple straight blade short sword with a hand forged hammered Damascus type layered iron and steel blade. This is an old sword, and there is significant rusting and darkness on the blade.

The wooden scabbard is very complex and well-made.  There are dozens of herbivore teeth on wrapped cord tassels suspended from the waxed braided cord wrappings and trim. The wood is decorated in three color red, black, and white paint.  There are tufts of (antelope?) fur and hide at the tips and sides.  There is a smaller attached scabbard for a smaller knife (that knife is no longer present). The scabbard for the sword measures 22-1/2 inches.  The smaller scabbard measures 9 inches long.

The blade measures 13-1/2 inches long and 5-1/4 inches of grip and decorative embellishments.  The grip is also decorated to match the scabbard with fur tuft, scrimshaw and waxed cording.

This appears to date to the 19th century.  The iron is very dark and shows years of age.

These are some detailed views:

• Grip Left
• Grip Right

The condition is near excellent with deep darkness in the iron blade.

It is a double curve blade with a very sharp needle point and sharp edge. The blade is hammer forged steel showing some traces of rust spotting, with the majority of the blade bright and not polished.

The blade measures 14-3/4 inches long and 5-7/8 inches of wooden grip with carved decorative embellishments that match the fitted wooden scabbard. There is an integral hanging loop and attached twisted cord.

This appears to date to the 19th century.  The iron is slightly dark and shows years of age.

These are some detailed views:

• Grip Left
• Grip Right
• Right Side out of the scabbard

The condition is near excellent except as noted above.

It is a recurved short knife with the outside (long single curve edge) of the blade sharpened.

The knife measures 8-1/2 inches long with 4-1/2 inches of that being the blade and 9-1/2 in the scabbard.  Approximately 1 inch of the handle showing above the fancy woven wood and split cane scabbard.

This appears to date to the 19th century.  The iron is very dark and the brass deeply tarnished and shows years of age.

This is the Left Side out of the scabbard

The condition is near excellent with deep darkness in the iron blade.

It is a simple slightly curved long knife/short sword with carved decorations on the both sides of the blade.

The knife measures 15-1/2 inches long and 11-7/8 inches of grip and decorative embellishments.

This appears to date to the 19th century.  The iron is very dark and the brass deeply tarnished and shows years of age.

These are some detailed views:

• Grip Left
• Grip Right

The condition is near excellent with deep darkness in the iron blade.

It is a classic design with a flattened diamond cross-section blade, very sharp edges and one-piece construction.

The spearr measures 20-1/2 inches long and 11-7/8 inch blade. The haft portion is also fully etched with decorative embellishments.

The iron is very dark and shows years of age.

These are some detailed views:

• Ball detail
• Blade detail

The condition is near excellent with deep darkness in the iron blade.

The blade measures 27-1/4 inches tip to the center of the grip. The blade is 1-3/16 inches wide at the top of the guard. It is deeply stamped with the number 1019 in Arabic numbers. The hilt measures 6-1/4 inches from pommel cap to the bird beaks.  These are views of the grip from the right, back and front, showing the twisted pair wire and teak wood grip.

It measures 33 inches overall.

These are overall right and left views.

There is no scabbard.

The arrow measures 39-1/2 inches tip to noch. The hand-forged iron tip is 4 inches long and approximately 3/4 inches wide. The feathers measures 11-1/2 inches long. We have several of these arrows, there may be minor cosmetic differences from the one shown.

These is an overall view.

The condition is near excellent with some slight ruffling of the feathers and spotting on the iron arrowhead.

The arrow measures 26 inches tip to noch. The wood is very straight grained and shows no signs of warpage nor is it cut to straighten it.  It is approximately 5/16 inches wide. We have several of these arrows, there may be minor cosmetic differences from the one shown.

These is an overall view.

The condition is near excellent throughout.

The blade measures 27 inches tip to the center of the grip. It is 6-1/2 inches wide at the top of the guard.  The blade is 2-1/2 inches wide.  The gold wire inlay runs 11 inches long and varies in width from 1/2 to 4 inches. It measures 33-1/2 inches overall.

These are close-ups of the handle right and left views.

There is no scabbard.

The blade measures 21-1/4 inches tip to the center of the grip. It is 5 inches wide at the top of the guard.  The blade is 1-5/8 inches wide. It measures 26-1/2 inches overall.

These are close-ups of the handle right and left views.

There is no scabbard.

The blade measures 21-1/2 inches tip to the center of the grip. It is 5 inches wide at the top of the guard.  The blade is 1-1/2 inches wide. It measures 25-1/2 inches overall.

These are close-ups of the handle right and left views.

There is no scabbard.

This is either a long knife or a short sword.

The blade measures 13-3/4 inches tip to the center of the grip. It is 6-1/2 inches wide at the top of the guard.  The blade is 1 inch wide at the fuller.   It measures 18 inches overall.

These are close-ups of the handle right and left views.

The scabbard is perfectly fitted to the knife.

This short sword is sharp only on one side (the long straight edge). The blade is a folded Damascus style metal.

The blade measures 19 inches tip to the center of the grip. It is 23-1/2 inches long overall.  The blade is 7/8 inch wide at the grip.   It measures 24 inches long overall in the scabbard.

These are close-ups of the handle right and left views.

The scabbard is perfectly fitted to the sword.

The single-edge blade measures 7 inches tip to the collar of the grip. It is 3/4 inches wide at the top of the guard.  There is a long stylized dragon on the left side of the blade and some markings (unreadable) on the right side of the blade.

These are close-ups of the handle right and left views. These are views of the knife in the scabbard, right and left.  There is a name engraved into the silver boot (note the Spanish influence) in a long panel.

The condition is near excellent, with some minor tarnish from age.

The double-edge blade measures 3-1/4 inches tip to the spine at the grip. It is 3/4 inches wide at the top of the guard.  This is a view of the other side of the blade and scabbard.

These are views of the knife in the scabbard, right and left.

The condition is near excellent, with the exception of a small crack in the ring that does not go all the way through.

This is a very unusual spear point.  It has a Java design (perhaps Moro), definitely South Pacific origin.  The blade is difficult to date, but is most certainly early 19th or possibly 18th century.

The blade has nearly identical design, featuring a winged dragon with a shaft rising from its head supporting a large crown with cross and standard with tassel (possibly Dutch influence in the design of the crown).

The blade measures 8-1/2 inches tip from the stop to the tip. It is 1-1/8 inches wide at the thickest part of the leaf shaped blade.  The shaft is 5-1/2 inches long and has a noticeable drill twist at the end to screw the shaft into a socket of the spear to retain it.  It measures 14 inches overall.

These are close-ups of the blade front and rear views.  These are some computer enhancements to bring up the pattern of the dragon front and rear.

There is no scabbard or spear shaft.

This is an unusually large size display.  The smaller ones (about half this size) are a little more common.  The shield shaped display board measures nearly 18 by 24 inches.

The weapons are made of steel cut from beer cans and fitted with bamboo shafts on the longer pieces (spears and arrows) and teak wood handles on the blade weapons.  All blades are secured by hand formed beercan collars.

Weapons included are:

• Capa-capa ax
• Patul ax
• Two (2) Sankul spears
• Three (3) Taming spea rs in a hand painted Karasak c arrier
• Six (6) Agong arrows
• Gunong
• Kalis
• Barong
• Kampilan
• Gayang
• Laring
• Banjal
• Pinsainali
• Janap
• Susuwat
• Sangot
• Punal
• Kris
• Pira
• Utak
• Panabas
• Bankow
• Zahot
• Binakoko
• Pamarilan
• Kangbantuli
• Balasiong

The blades measure about 4 to 5-1/2 inches long overall. The spears are about 9 inches long.

This is a close-up showing some detail.

The condition is near excellent throughout.

This is an older design than currently seen in that there is not a blade guard fashioned on the handle, there is only a simple brass ferrule.

The blade measures 5-3/4 inches tip to the grip. It has writting and engraved scrollwork on one side.  The other side of the blade shows some moderate pitting from age. The entire knife is 10 inches long overall.

There is a traditional scabbard that is original to the knife.

The blade measures 9-3/4 inches tip to the grip. The bone is 5-1/2 inches long. It measures 15-1/4 inches overall.

There is no scabbard.

The dagger measures 9-3/4 inches tip to the pommel. The handle is 3-3/4  inches long. The blade measures 6 inches long.

This is a view of the front and back of the grip area.

There is no scabbard.

The sword measures 23 inches tip to the pommel nut. The handle is 5  inches long. The blade measures 17-5/8 inches long. There is a single wide 11 inch fuller on each side There are no maker marks. It is dark from age.

This is a view of the top, bottom, right and left of the grip area.

There is no scabbard.

The blade measures 14-1/4 inches tip to the leather buffer. The wooden grip is 4 inches long. The brass knuckle bow measures 5-3/4 inches overall.

The condition is very used, with vestiges of old etching on portions of the blade.

There is no scabbard.

It measures 14-3/4 inches long with a 10-1/4 inch blade.

The condition is near good overall per the image furnished.

There is no scabbard.

This is a heavy solid MOP handle 9-1/2 inch long dagger with 5-3/4 inch diamond cross section double edge blade with 2 inch steel crossguard.

The condition is generally near excellent, as shown.

There is no scabbard.

The blade measures 3 inches tip to the grip. The wooden grip is 4-1/2 inches long. It measures 7-5/8 inches overall.

There is no scabbard.

The blade measures 6 inches tip to the grip. The wooden grip (right -- left) is 4 inches long. It measures 10-1/4 inches overall.

There is no scabbard.

These are views from the top and one from the side.

There is no scabbard.

The blade measures 6-3/4 inches tip to the grip. The wooden grip and scabbard (right -- left -- front) is completely covered with brightly colored  beads.  The beads are silk thread sewn.

It measures 15-1/2 inches overall.

There is some minor damage to the beadwork in several places that requires attention.  The blade is dark from age.

The Maschinengewehr 08, or MG08, was the German Army's standard machine gun in World War I and is an almost direct copy of Hiram S. Maxim's original 1884 Maxim Gun.  This is a solid steel model, with incredible detail.  It is very realistic-looking (except for the size) and virtually indistinguishable from the full-size model except under the closest examination.  Many images of different parts of the model are shown to give a sense of the craftsmanship and detail of this superlative scale model.

The gun measures 18-3/4 inches muzzle of the non-functional suppressor to the grips. The mount and shields are included and equally detailed.

This is a close-up views of various parts of the model:

• Disassembled view Right Side
• Disassembled view Left Side
• Assembled view Rear
• Assembled view Top

The condition is near excellent throughout. There is some minor wear to the paint on the shield and other parts from routing handling and display. There are a couple of minor chips to the black enamel paint (easily restorable).

It has some unusual features including a vertical fore end, a tapered barrel without fins or Cutts compensator, a "fixed" style firing pin, and similar details seen in the WWII M1 design. Several images of different parts of the model are shown to give a sense of the craftsmanship and detail of this superlative scale model.

The gun measures 16-3/4 inches muzzle of the non-functional barrel to the butt of the walnut stock. The detachable stick magazine is 3-3/8 inches long and is solid (no internal parts).

This is a close-up views of various parts of the model:

• Receiver right side, bolt open
• Receiver left side, bolt closed

The condition is near excellent throughout.

It is styled after the famed British suppressed (silenced) SOE commando submachine gun of WWII.  This is a solid steel model, with incredible detail.  It is very realistic-looking (except for the size) and virtually indistinguishable from the full-size model except under the closest examination.  Many images of different parts of the model are shown to give a sense of the craftsmanship and detail of this superlative scale model.

The gun measures 19 inches muzzle of the non-functional suppressor to the butt of the welded metal loop stock. The detachable stick magazine is 5 inches long and has one dummy cartridge.

This is a close-up views of various parts of the model:

• Disassembled suppressor, barrel, and receiver
• Magazine well, showing MK II marking
• Receiver, bolt open
• Receiver, bolt closed
• Receiver, bolt cocked
• Left side view

The condition is near excellent throughout. There is some minor wear to the paint on the magazine and magazine well from insertion and removal of the magazine.  There are a couple of minor chips to the black enamel paint (easily restorable).

It is styled after the famed Springfield Model 1903 Rifle.  This is a solid steel and polished wood model, with incredible detail.  It is very realistic-looking (except for the size) and virtually indistinguishable from the full-size model except under the closest examination. Even the bolt safety works!  Many images of different parts of the model are shown to give a sense of the craftsmanship and detail of this superlative scale model.

The rifle measures 21-1/2 inches muzzle to butt plate.

This is a close-up views of various parts of the model:

• Right side receiver detail
• Left side receiver detail
• Right side, bolt open (note the [removeable] dummy cartridge!)
• Top Receiver, bolt closed, cocked
• Receiverl Springfield Markings (note the Serial Number is "03"!)
• Barrel muzzle and front sight
• Butt Plate detail

The condition is near excellent throughout.

It is styled after the famed Winchester Model 1894 Rifle.  This is a solid steel and polished wood model, with incredible detail.  It is very realistic-looking (except for the size) and virtually indistinguishable from the full-size model except under the closest examination. Even the lever safety works!  Many images of different parts of the model are shown to give a sense of the craftsmanship and detail of this superlative scale model.

The rifle measures 21 inches muzzle to butt plate.

This is a close-up views of various parts of the model:

• Right side close-up detail
• Left side close-up detail
• Right side, action open
• Top Receiver, bolt open
• Top Receiver, bolt closed, cocked
• Top strap with Winchester markings
• Barrel Winchester Markings
• Barrel muzzle and front sight
• Butt Plate detail

The condition is near excellent throughout.

It is styled after the famed Stevens Models 17-29 "FAVORITE" Rifle.  This is a solid steel and polished wood model, with incredible detail.  It is very realistic-looking (except for the size) and virtually indistinguishable from the full-size model except under the closest examination. Every part works, with the exception of the scope sight, which does not have glass optics installed.  Several images of different parts of the model are shown to give a sense of the craftsmanship and detail of this superlative scale model.

The rifle measures 20 inches muzzle to butt plate.

This is a close-up views of various parts of the model:

• Right side close-up detail
• Left side close-up detail
• Action, bottom detail
• Muzzle detail

The condition is near excellent throughout.

This is 1/3 scale model of the famed World War II trench knife made for the US Army Ranger Battalions during WWII and used in the ETO.  It is shown with a US quarter dollar coin for scale purposes.  It is not possible to fit your fingers or hand through this knife.  It is a MINIATURE.

The detail and workmanship are superlative throughout.  The steel and brass is sterile, having no markings on the guard or blade.  The scabbard is leather with a riveted loop hanger.

The entire knife and scabbard measure 5-1/4 inches long.  The steel blade measures 3 inches long, the knife is 4-7/8 inches long overall.  The scabbard is 4-3/4 inches long including the loop.  This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the famed World War II trench knife made for the US Army Ranger Battalions during WWII and used in the ETO.  It is not possible to fit your fingers or hand through this knife.  It is a MINIATURE.

The detail and workmanship are superlative throughout.  The steel and brass is sterile, having no markings on the guard or blade.  There is no scabbard with this knife

The steel blade measures 3-1/4 inches long, the knife is 5 inches long overall. This is an image of the back.

The condition is near excellent throughout.  There is some slight rusting to the high carbon steel blade that comes off easily.

This is 1/3 scale model of the famed World War II trench knife made for the US Army Ranger Battalions during WWII by Cole.  It is not possible to fit your fingers or hand through this knife.  It is a MINIATURE.

The detail and workmanship are superlative throughout.  The steel blade is maker marked J.M. and copper knuckle bow has three sets of J.T.M. markings.  There is a scabbard with this knife

The steel blade measures 3-1/4 inches long, the knife is 5-1/2 inches long overall. This is an image of the back.

The condition is near excellent throughout.  There is some slight tarnish to the hilt that comes off easily.

This is 1/3 scale model of the famed World War II 1SSF issue knife made by Case for the US-Canada Special Forces during WWII and used in the ETO.  It is a MINIATURE.

The detail and workmanship are superlative throughout.  The steel blade is sterile, having no markings on the guard or blade other than the serrated thumb depression.  The scabbard is leather with a riveted web belt loop hanger with the conveyor belt type staples and point shield. The handle is stacked leather washers. The crossguard and pointed pommel are steel.

The entire knife and scabbard measure 6 inches long.  The steel blade measures 3-1/4 inches long, the knife is 5-1/2 inches long overall.  The scabbard is 6 inches long including the loop. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the famed World War II Marine Corps issue knife made for the USMC during WWII and used in the PTO.  It is shown with a US quarter dollar coin for scale purposes. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The steel and brass is sterile, having no markings on the guard or blade.  The scabbard is leather with a riveted loop hanger. The handle is green water buffalo horn with 4 brass rivets. The crossguard is brass.

The entire knife and scabbard measure 5-1/2 inches long.  The steel blade measures 3-1/2 inches long, the knife is 5-1/8 inches long overall.  The scabbard is 5-1/4 inches long including the loop. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the famed World War II Marine Corps theater made bolo combat knife made by Marines during WWII and used in the PTO. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The scabbard is similar to the machete resin style with web belt loop hanger. The handle is wood slabs with two steel screws. The crossguard is steel.

The entire knife and scabbard measure 6 inches long.  The steel blade measures 3-5/8 inches long, the knife is 5-1/2 inches long overall.  The scabbard is 5 inches long including the loop. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the famed World War II commando knife as made by Wilkinson Sword during WWII and used in the ETO. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The scabbard is similar to the ones used by British forces with tabbed hanger and metal tip guard drag.

The entire knife and scabbard measure 5-1/2 inches long.  The steel blade measures 3 inches long, the knife is 5-3/8 inches long overall.  The scabbard is 5-1/2 inches long including the loop. This is an image of the back.

The condition is near excellent throughout.

This is 1/3 scale model of the famed World War II commando knife used during WWII and used in the ETO at Operation Market Garden. It is a MINIATURE.

The detail and workmanship are superlative throughout.  There is no scabbard present

The steel blade measures 2-1/2 inches long, the knife is 4-1/2 inches long overall. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the famed World War II Marine Corps issue knife made for the USMC during WWII and used in the PTO.  It is shown with a US quarter dollar coin for scale purposes. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The bright steel blade has a "JM" maker markings near the guard on the blade.  The scabbard is leather with a riveted loop hanger. The handle is stacked leather washers with composite spacers at the guard and steel pommel. The crossguard is steel.  The blade is staked to the pommel.

The entire knife and scabbard measure 5-1/2 inches long.  The steel blade measures 2-3/4 inches long, the knife is 4-7/8 inches long overall.  The scabbard is 5-1/2 inches long including the loop. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the famed World War II Ek #2 custom maker fighting knife made for the military service members during WWII. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The bright steel blade has no markings.  The scabbard is leather with a retaining snap loop. The handle is two wood slabs. The crossguard is brass.  The blade is riveted to the blade.

The entire knife and scabbard measure 5-1/4 inches long.  The steel blade measures 2-7/8 inches long, the knife is 5 inches long overall.  The scabbard is 4-1/2 inches long. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the famed World War II Marine Corps issue knife made for the USMC during WWII and used in the PTO. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The subdued steel blade has an unreadable maker mark near the guard on the blade.  The scabbard is leather with a snap loop hanger. The handle is stacked leather washers with composite spacer at the guard and steel pommel. The crossguard is steel.  The blade is staked to the pommel.

The entire knife and scabbard measure 5-1/2 inches long.  The steel blade measures 3-1/8 inches long, the knife is 5-1/8 inches long overall.  The scabbard is 5-1/2 inches long including the loop. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the famed World War II fighting knife. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The subdued steel blade has a engraved maker marks and date on the blade.  The scabbard is not shown. The handle is stacked leather washers with steel cross guard and steel pommel. The blade is well-staked to the pommel.

The entire knife measures 5-5/8 inches long.  The steel blade measures 3-3/8 inches long.

The condition is near mint throughout.

This is 1/3 scale model of the World War I German made PERES long style dress bayonet and all metal scabbard. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The bright polished steel blade has D. PERES GERMANY German maker markings near the guard on the blade. The scabbard is black enamel painted steel with no hanger. The handle is cast on brass and it is NOT slotted for a rifle bayonet mount.

The entire knife and scabbard measures 6-1/4 inches long.  The steel blade measures 4-1/4 inches long, the knife is 5-3/4 inches long overall.  The scabbard is 4-3/8 inches long. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the World War I German made PERES long style dress bayonet and all metal scabbard. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The bright polished steel blade has D. PERES GERMANY German maker markings near the guard on the blade. The scabbard is black enamel painted steel with no hanger. The handle is cast on brass and it is NOT slotted for a rifle bayonet mount.

The entire knife and scabbard measures 6-1/4 inches long.  The steel blade measures 4-1/4 inches long, the knife is 5-3/4 inches long overall.  The scabbard is 4-3/8 inches long. This is an image of the back.

The condition is near very good, with tarnish and significant chipping of the black enamel on the scabbard.  There is a pinch in the scabbard, evident in the images that does not prevent the bayonet from being fully seated.

This is 1/3 scale model of the rare Vietnam War era gray handle Mark I combat knife made by Gerber. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The knife is sterile with no markings.  The blade has the plain unserrated wasp waist. It has the 5 degree cant. The grip is alloy cast on the blade. There is no scabbard with this knife.

The steel blade measures 3 inches long, the knife is 5 inches long overall.  The scabbard is 6-3/8 inches long. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the rare Vietnam War era orange handle Mark I combat diver knife made by Gerber.  It is shown with a US quarter dollar coin for scale purposes. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The knife is sterile with no markings.  The blade has the plain unserrated wasp waist. It has the 5 degree cant. The grip is alloy cast on the blade. The scabbard is brass riveted leather with snap retaining strap.

The entire knife and scabbard measures 6-3/8 inches long.  The steel blade measures 3 inches long, the knife is 5 inches long overall.  The scabbard is 6-3/8 inches long. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the rare Vietnam War era yellow handle Mark I combat diver knife made by Gerber. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The knife is sterile with no markings.  The blade has the serrated wasp waist. The grip is alloy cast on the blade. The scabbard is double stitched rough out leather with rubber retainer.

The entire knife and scabbard measures 6-3/8 inches long.  The steel blade measures 3 inches long, the knife is 5 inches long overall.  The scabbard is 6-3/8 inches long. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the rare Vietnam War era experimental knife made by Gerber.  It is shown with a US quarter dollar coin for scale purposes. It is a MINIATURE.

The detail and workmanship are superlative throughout.  The knife has U.S. markings on one side and "XCB" on other side of the blade at the guard.  The blade has crosshatch style sawteeth on the back of the spine.  The false edges are sharp.  The hole in the blade was part of the design.  The pommel is a steel hex head, with the blade staked on. The scabbard is brass riveted heavy chocolate brown canvas with leather blade guard and tip.  There is a riveted loop grip retainer with Velcro fastener. The handle is black linen Micarta with two steel rivets. The crossguard is steel.

The entire knife and scabbard measures7-1/2 inches long.  The steel blade measures 4-1/2 inches long, the knife is 6-7/8 inches long overall.  The scabbard is 7-1/4 inches long. This is an image of the back.

The condition is near mint throughout.

This is 1/3 scale model of the knife that was a precursor to the Randall designs.  It is a MINIATURE.

It has a fossil antler pommel, stacked leather washers and composite colored spacers with a brass crossguard. The blade has no markings. There is a fitted stitched scabbard with this knife

The steel blade measures 3 inches long, the knife is 5-1/8 inches long overall. This is an image of the back.

The condition is near excellent throughout..

This is 1/3 scale model of the famed fighting knife.  It is a MINIATURE.

It has a brass pommel, stacked leather washers and composite colored spacers with a brass crossguard. The blade has no markings. There is a fitted stitched scabbard with this knife

The steel blade measures 3-1/4 inches long, the knife is 5-3/4 inches long overall. This is an image of the back.

The condition is near excellent throughout..

This is 1/3 scale model of this fancy fighting knife.  It is a MINIATURE.

It has slab fossil scales riveted to the blade handle with thong hole and with a steel crossguard. The blade has JM maker and 004 serial number markings. There is a fitted stitched scabbard with this knife

The steel blade measures 3-1/8 inches long, the knife is 5-1/4 inches long overall, and has a sharpened false edge.  This is an image of the back.

The condition is near excellent throughout..

This is 1/3 scale model of this fancy survival knife.  It is a MINIATURE.

It has a round hardwood grip fitted to a hollow handle with a brass pommel cap that unscrews to reveal a miniature fishline and hand fashioned fish hook inside the blade handle. It has a brass crossguard. The blade has JM maker and 010 serial number markings. There is a fitted stitched scabbard with this knife

The steel blade measures 2-3/4 inches long, the knife is 4-3/4 inches long overall, and has a sharpened false edge.  This is an image of the back.

The condition is near excellent throughout..

This is 1/3 scale model of the famed fighting knife.  It is a MINIATURE.

It has a brass pommel, stacked leather washers with a brass crossguard. The blade has JM maker markings. There is a 5-3/4 inch fitted stitched scabbard with this knife

The subdued wasp waisted steel blade measures 2-3/4 inches long, the knife is 4-3/4 inches long overall. This is an image of the back.

The condition is near excellent throughout..

This is 1/2 scale model of the famed Arkansas Toothpick style knife.  It is a MINIATURE.

The blade has no maker markings. The grip has a laser scrimshaw falcon with folded wings on one side of the grip.  There is no scabbard with this knife

The steel blade measures 4 inches long, the knife is 6-1/4 inches long overall.

The condition is near mint throughout.

This is 1/3 scale model of the famed Bowie knife.  It is a MINIATURE.

The blade is stamped with CUB HUNTER markings on the left side.  There are also COLONIAL PROV. R.I. U.S.A. maker markings on the ricasso.  There is no scabbard with this knife

The steel blade measures 2-3/8 inches long, the knife is 4-1/4 inches long overall. This is an image of the back.

The condition is near very good throughout.  There is some slight rusting to the high carbon steel blade that comes off easily.

Miniature Mother of Pearl 2-Blade Folding Knife

This is 1/3 scale model of the classic 2-blade folding knife.  It is a MINIATURE.

Neither blade is maker marked.  The knife is very well-made and completely functional with miniature springs for both blades complete and intact.

The longer steel blade measures 3/4 inches long, the shorter blade is 1/2 inch, the knife is 1-1/8 inches long (closed) overall. This is an image of the back, and one from the top.

The condition is near very good throughout.  There is some slight rusting to the high carbon steel blades that comes off easily.  There is a hairline crack in one of the MOP scales at the front rivet.

Miniature Brazil Military Academy Sword

This is 1/4 scale model of the classic DUQUE DE CAXIAS sword.  It is a MINIATURE, and has a suburb level of detail and shows high quality workmanship throughout.

The blade is maker marked EBERLE (Eberle Mundial Group [(Hércules S/A Fábrica de Talheres, Zivi S/A Cutelaria and Eberle S/A]).  The blade has a raised etch with the DUQUE DE CAXIAS name and embellishments, as shown.

The steel blade measures 4-5/8 inches long and it is 6-1/8 inches long (in the scabbard) overall.

The condition is near mint throughout.

Miniature USMC Officer Mameluke Sword

This is 1/4 scale model of the classic Mameluke sword of 1805.  It is a MINIATURE, and has a suburb level of detail