German Military Badges

This is an extremely rare badge. It has an impressed RZM maker mark.

Here is a view of the back.

It measures 54mm

The condition is near excellent, with some minor wear and darkness from tarnish throughout.

This is an extremely rare badge. It is 800 coin silver with a square maker marks resembling a nested LN in raised letters.  It also has stamped GES. GESCH. and 800 content marks.

Here is a view of the back.

It measures 48mm

The condition is near excellent, with some minor wear and darkness from tarnish throughout.

(This is the same badge shown on the Sports Badges page.  We only have the one badge.  It is shown here for convenience.)

This is a very rare badge. It is gold plated with no maker marks. This is the "three hole" long fanged vaulted solid back variant of this badge. It has a flat pin and simple hook attachment.

Here is a view of the back.

The condition is very good to near excellent, with moderate to heavy signs of tarnish and wear to the gilt finish from age.

This is a very scarce badge. It is silver plated with no maker marks. This is the "three hole" short fanged vaulted hollow back variant of this badge. It has a round pin and simple hook attachment.

Here is a view of the back.

The condition is near excellent, with moderate signs of tarnish and wear to the silver finish from age.

This is a scarce badge. It is bronze with no maker marks. This is the "two hole" short fanged vaulted hollow back variant of this badge. It has a round pin and simple hook attachment.

Here is a view of the back.

The condition is near excellent, with minor signs of wear from age.

(Top one a WWII ORIGINAL and the bottom one a POST WAR copy)

This is a scarce original badge paired with a post-war copy for comparison purposes. Both are bronze with no maker marks.

The original is a "three hole" long-fanged vaulted solid back variant of this badge. It has a flat pin and simple hook attachment on the back.

The copy has NO holes, is NOT vaulted, has a ROUND pin with the wrong type of hinge and catch on the back, thick snakes and dagger, and smaller skull. The only reason the copy is included is that this particular pair of badges was used in a display to demonstrate the distinctions between the original and the post-war versions of the solid back style badges.

Here is a view of the back.

The condition is near excellent, with minor signs of wear from age.

The price shown is for the PAIR of badges, we do not intend to sell them separately.

This is a very hard to find badge in any condition. It has no maker mark. It measures 15/16 inches square.

Here is a view of the back.

The condition is near excellent, with some signs of minor wear.

This is a very scarce badge in any condition. It has no maker marks. It measures 2-1/2 by 1-5/8 inches wide. It has the usual wide pin and simple hook closure.

Here is a view of the back.

The condition is near very good, with some minor signs of wear.

This is a hard to find badge. It is gilded with A.G.M u. K. GABLONZ maker marks and the PEEKHAUS design marks in large raised letters. This is a view of the back with the pin up to show all the maker marks.

Here is a view of the back with the pin down.

The condition is excellent, with virtually no signs of  wear to the gilt.

This is a hard to find badge. It is gilded with A.G.M u. K. GABLONZ maker marks and the PEEKHAUS design marks in large raised letters. This is a view of the back with the pin up to show all the maker marks.

Here is a view of the back with the pin down.

The condition is excellent, with very minor signs of  wear to the gilt.

This is a hard to find badge. It is gilded with NO maker marks apparent. This is a view of the back with the pin up.

Here is a view of the back with the pin down.

The condition is excellent, with very minor signs of  wear to the gilt.

This is a hard to find badge. It is gilded with worn and slightly da maged A.G.M u. K. GABLONZ maker marks and the PEEKHAUS design marks in large raised letters and minor battle damage. This is a view of the back with the pin up to show all the maker marks.

Here is a view of the back with the pin down.

The condition is near good, with some signs of  wear to the gilt and some damage visible at the lower right side in the images.  It is priced accordingly.

This is a hard to find badge. It is silver washed with raised "F&B. L" maker marks apparent.

Here is a view of the back with the pin down.

The condition is excellent, with very minor signs of  wear to the gilt.

This is a hard to find badge. It is bronze with raised "F&B. L" maker marks apparent.

Here is a view of the back with the pin down.

The condition is excellent, with minor signs of  wear.

This is a hard to find badge. It is bronze with no maker marks apparent.

Here is a view of the back with the pin down.

The condition is excellent, with minor signs of  wear.

It is a white alloy, with crossed Russian Cossack swords and wreath design with "FRONTE RUSSO" in Italian on a banner across the bottom.

Here is a view of the back. It has a lot of raised maker marks typical of Italian badges. It was made by LORIOLI of Milano, the same firm that made the German Italian campaign medals. This is the same badge that is also shown on the Italian militaria page.

The condition is near very good, with some oxidation from age and signs of long-time wear. The original pin is detached from the badge, but it is included.

This is an extremely rare badge in the hinged hard case.

Here is a view of the front and back of the badge with the pin down. The badge is VERY slightly vaulted.  It is a white metal alloy eagle with brass gilded wreath and small rivets.

These are views of the case open, top and bottom.

The condition is near excellent, with some signs of minor wear.

This is an scarce badge.

Here is a view of the back with the pin down and one with the pin up. The badge is VERY slightly vaulted. There are no maker marks.

The condition is near excellent, with some signs of minor wear.

This badge has no maker marks. It shows very slight signs of routine wear.

Here is a view of the back with the pin down. The badge is a very deep die-struck hollow back.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This badge has no maker marks. It shows very slight signs of routine wear.

Here is a view of the back with the pin down. The badge is a very deep die-struck hollow back.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down. The badge is flat.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This badge has no maker marks and it is flat

Here is a view of the back with the pin down. The badge is flat and a deep red-bronze color.

The condition is near excellent, with slight signs of minor wear, and some tarnish present as shown.

This badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down. The badge is round.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

It does not get any more MINT condition than this!

This die struck badge has a stamped GWL maker mark. It shows absolutely no sign of wear. This is the top of the box identifying the contents.  There is some minor rust on the steel staples that does not detract.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is absolutely MINT, as shown.

This very sharp die-struck hollow badge has no maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, and some tarnish present as shown.

This die struck hollow back badge has exceptional detail front and back. There are no maker marks. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge has an applied round pad hook catch for the simple hinged needle pin.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has stamped GWL stamped maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge has an integral hook catch for the simple hinged needle pin.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of very light wear and minor tarnish.

Here is a view of the back with the pin down. The badge has an integral hook catch for the simple hinged needle pin. The swastika is one piece with the top of the rifle.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of very light wear and minor tarnish.

Here is a view of the back with the pin down. The badge has a T-bar style needle pin.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of very light wear and minor tarnish.

Here is a view of the back with the pin down. The badge has round pad applied style needle pin and hook catch.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of minor wear and moderate tarnish.

Here is a view of the back with the pin down.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has stamped GWL stamped maker mark. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge has an pad applied hook catch for the t-bar style hinged needle pin.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of very light wear.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is near excellent, with some signs of minor wear, as shown.

This die struck badge has no maker marks. It shows signs of minor to moderate wear to the silver plate.

Here is a view of the back with the pin down. The badge is slightly vaulted.

The condition is near excellent, with some signs of moderate wear, as shown.

This shallow vaulted die-struck hollowback badge has no maker mark. It shows some minor signs of wear.

Here is a view of the back with the pin down.

The condition is very good to near excellent, with some wear, as shown.

This deep vaulted badge has raised "FLL" in three circles and a raised "43" maker marks. It shows signs of routine wear.

Here is a view of the back with the pin down and one with the pin up.

The condition is near excellent, with some signs of minor wear, and very minor tarnish present as shown.

It shows very little signs of wear to the silver plate.

Here are views of the solid back with the pin down and pin up showing the raised IA stylized maker marks

The condition is near excellent, with almost no signs of wear, as shown.

This is a very rare solid flat badge has a raised Assmann "A" maker mark. It shows almost no signs of wear.

Here is a view of the back showing the large screwback fastener in place and one with the back removed to show the maker mark.

The condition is near excellent, as shown.

Here is a view of the back with the pin down. This is a shot of the raised "RK" maker mark.

The condition is near very good, with signs of moderate to heavy wear the silver finish on the wreath, as shown.

Here is a view of the back with the pin down. This is a shot of the raised "RK" maker mark.

The condition is near very good, with signs of slight to moderate wear to the silver finish on the wreath, as shown.

Here is a view of the back with the pin down. This is a shot of the raised "JFS" maker mark.

The condition is near very good, with noticeable signs of moderate to heavy wear to the gilt finish, as shown.

Here is a view of the back with the pin down. This is a shot of the raised "JFS" maker mark.

The condition is near excellent, with only the slightest signs of wear to the gilt finish, as shown.

This two-piece badge has a separately applied winged arrow. It has no maker mark. It shows virtually no wear.

Here is a view of the back with the pin down.

The condition is near excellent, as shown.

This two-piece badge has a separately applied winged arrow. It has no maker mark. It shows virtually no wear.

Here is a view of the back with the pin down and one with the pin up.

The condition is near excellent, as shown.

This two-piece badge has a separately applied black falcon head. It has no maker marks. It shows minor signs of  wear and some slight tarnish.

Here is a view of the back with the pin down and with the pin up.

The condition is near excellent, as shown.