German Third Reich Tinnie Pin Badges (1935-1936)

Here is a view of the back. This badge is a silver alloy with oak leaves and acorns prominent in the design. It has the N.S.D.F.B.St. and helmet in the center.

It is die struck and has a simple spring pin catch. The back has most of the original paint intact.

The badge measures 2 inches wide and 1-1/4 inches high. There is some very minor wear apparent at the high points from routine use.

The overall condition is near excellent.

Here is a view of the back.

It is die struck and has an applied soldered hinged pin catch. It has raised no maker marks.

The overall condition is near very good, with signs of wear.

It is a die stuck silver painted steel with soldered spring pin. There are no maker marks on the back.

Here is a view of the back.

The condition is near good, with minor scratches throughout.

It is a cast composite with a pad mounted spring pin. There are no maker marks on the back.

Here is a view of the back.

The condition is near excellent throughout.

It is die struck plated brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, with some wear to the plating apparent.

It is die struck plated brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, with some wear to the plating apparent.

It is die struck silver painted steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent.

It is die struck brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent.

It is a die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, with some minor wear.

It is a die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent, with only slight wear.

It is a cast plastic with an applied hinged pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent, with some minor wear.

It is a die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, with some minor wear.

It is an heavy aluminum alloy with a press fitted spring pin. There are raised ENTW. R. KASTER ROBINSON maker marks on the back.

Here is a view of the back.

The condition is near excellent throughout.

It is an heavy aluminum alloy with a press fitted spring pin. There are raised ROBINSON OBERSTEIN/NAHE  maker marks on the back.

Here is a view of the back.

The condition is near excellent throughout.

It is an aluminum alloy with a press fitted spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is an aluminum alloy with a press fitted spring pin. There is a raised C. TH. DICKE LÜDENSCHEID maker mark.

Here is a view of the back.

The condition is near excellent throughout.

It is a very heavy solid alloy badge. It has a press fitted spring pin. There is a raised PAUL SCHULZE & CO maker mark.

Here is a view of the back.

The condition is near excellent throughout. The flakes on the face are bits of paper, and not flaws on this outstanding badge.

It is a very heavy solid alloy badge. It has a soldered spring pin. There is a raised PAUL SCHULZE & CO LÜBECK maker mark (partially worn).

Here is a view of the back.

The condition is near excellent, excepting the wear to the maker mark on the reverse targ.

It is an aluminum alloy. The press fitted spring pin is missing. There is a raised FERD. WAGNER PFORZHEIM 8 maker mark.

Here is a view of the back.

The condition is near very good throughout.

It is an aluminum alloy. It has a press fitted spring pin closure. There is a raised PAUL SCHULZE & CO. LÜBECK maker mark.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck copper with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is unglazed china with space for a spring pin (which is absent, but easily replaced). There is a raised 42 maker mark.

Here is a view of the back.

The condition is near excellent, with pin missing.

It is die struck steel. There are no maker marks.

Here is a view of the back.

The condition is near excellent, with pin missing.

It is a solid heavy brass with a soldered hinged pin assembly. There is a raised G. DANNER MÜHLHAUSEN THÜR.  maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a bronze color die struck steel badge with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good, with minor wear to the finish, as shown.

It is a gilt brass die struck badge with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is fair to near good, with wear to the gilt, as shown.

It is a black die struck steel badge with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near good, with wear to the paint, as shown.

It is an aluminum alloy with a press fitted spring pin. There is a raised R. HAUSCHILD PFORZHEIM maker mark.

Here is a view of the back.

The condition is near excellent throughout.

It is an aluminum alloy with a press fitted spring pin. There is a raised FR. NEUNER CREUSSEN OBFR. maker mark.

Here is a view of the back.

The condition is near excellent throughout.

It is an aluminum alloy with a press fitted spring pin. There is a raised PLEUGER & VOSS G.MB.H. LÜDENSCHEID maker mark.

Here is a view of the back.

The condition is near excellent throughout.

It is a gilt white alloy with a press fitted spring pin. There is a raised W. REDO SAARLAUTERN maker mark.

Here is a view of the back.

The condition is near very good, with about 20% of the gilt remaining.

It is a gilt white alloy with a press fitted spring pin. There is a raised G. DANNER MÜHLHAUSEN THUR. maker mark.

Here is a view of the back.

The condition is near very good, with about 20% of the gilt remaining.

It is a gilt white alloy with a press fitted spring pin. There is a raised L. CHR. LAUER NÜRNBERG-BERLIN maker mark.

Here is a view of the back.

The condition is near very good, with about 30% of the gilt remaining.

It is a cast aluminum alloy with a press fitted spring pin. There are raised WALTER DEMMER LÜDENSCHEID maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good throughout.

It is die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near very good throughout.

It is a die struck aluminum alloy with a press fitted spring pin. There are stamped F. MANNHEIM K'LAUTERN (Kaiserslautern) maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is die struck steel with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck aluminum alloy with a press fitted spring pin. There is a raised LAUER NÜRN'BG-BERLIN (Nuremburg) maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck white alloy with a pad applied spring pin. There is a stamped DESCHLER u. SOHN MÜNCHEN 9 maker marks on the back.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck aluminum alloy with a press fitted spring pin. There are raised PAULMANN & GRONE LÜDENSCHEID maker marks on the back.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck aluminum alloy with a press fitted spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a cast aluminum alloy with a press fitted spring pin. There are PAUL KRAMER NEUCHATEL raised maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.

It is a die struck gilded brass with a soldered spring pin. There are no maker marks.

Here is a view of the back.

The condition is near excellent throughout.